--- title: "How to Install Virtualmin on Ubuntu 24.04 for Web Hosting" description: "Install Virtualmin GPL on Ubuntu 24.04 with the official installer, finish the post-install wizard and create a virtual server with HTTPS, mail and MariaDB." category: "Control Panels and Management" language: en source: https://cubepath.com/docs/control-panels-and-management/virtualmin-installation-for-hosting-management updated: 2026-09-25 --- # How to Install Virtualmin on Ubuntu 24.04 for Web Hosting Virtualmin is an open source hosting control panel built on top of Webmin. It turns a single server into a complete hosting platform: each domain becomes a "virtual server" with its own Linux user, website, PHP configuration, MariaDB databases, mailboxes and DNS zone. In this tutorial you will install Virtualmin GPL on a fresh Ubuntu 24.04 server with the official installer, complete the post-install wizard and create a first virtual server with a Let's Encrypt certificate. ## Prerequisites To follow this guide you need: - A freshly installed server running Ubuntu 24.04 LTS, for example a CubePath VPS. The installer also supports Debian 12 and 13 and Rocky Linux or AlmaLinux 8, 9 and 10. It must be a clean system: do not install Apache, Nginx, MariaDB or Postfix beforehand. - At least 2 GB of RAM (the installer adds swap if memory is low) and 20 GB of disk. 4 GB is more comfortable if you enable ClamAV and SpamAssassin. - A user with `sudo` privileges. - A fully qualified hostname for the server, for example `host.your_domain`, with a DNS A record pointing to `your_server_ip`. It must be different from the domains you will host. - A domain to host, `your_domain` in this guide, with its A record pointing to the same IP. ## Step 1 - Setting a fully qualified hostname The installer refuses to continue without a fully qualified domain name, and it uses the hostname to request a Let's Encrypt certificate for the panel. Set it now: ```bash sudo hostnamectl set-hostname host.your_domain ``` Add the name to `/etc/hosts` so it resolves locally: ```bash sudo nano /etc/hosts ``` ```text 127.0.0.1 localhost your_server_ip host.your_domain host ``` Verify: ```bash hostname -f ``` ```output host.your_domain ``` ## Step 2 - Running the Virtualmin installer Virtualmin is installed with a script that adds the Virtualmin and Webmin repositories and installs and configures the whole stack. Download it and read it before running it as root: ```bash curl -fsSL -o virtualmin-install.sh https://download.virtualmin.com/virtualmin-install less virtualmin-install.sh ``` The script accepts a few options. The most useful ones are: | Option | Effect | |---|---| | `--bundle LAMP` | Apache, MariaDB and PHP (default) | | `--bundle LEMP` | Nginx, MariaDB and PHP | | `--type mini` | Minimal install without mail filtering, ClamAV and some extras, for small servers | | `--hostname host.your_domain` | Force the hostname during installation | Run the default LAMP installation: ```bash sudo sh virtualmin-install.sh --bundle LAMP ``` The installer lists the supported systems and asks for confirmation. Type `y`. It then updates the system, installs the packages and runs the configuration phase, which takes 5 to 15 minutes. When it finishes, it shows where to log in: ```output Installation Complete! If there were no errors above, Virtualmin is ready to be configured at https://host.your_domain:10000. ``` > Note: The installer removes UFW and configures firewalld with the ports Virtualmin needs (SSH, HTTP, HTTPS, mail, DNS, FTP and 10000 for the panel). Manage the firewall with `firewall-cmd` or from the panel from now on, not with `ufw`. Check that the panel service is running and the firewall allows its port: ```bash sudo systemctl status webmin --no-pager sudo firewall-cmd --list-all ``` ```output ● webmin.service - Webmin server daemon Active: active (running) since Thu 2026-09-25 11:03:18 UTC; 2min ago ... public (active) services: dhcpv6-client dns ftp http https imap imaps pop3 pop3s smtp smtps ssh ports: 10000-10100/tcp 20000/tcp 49152-65535/tcp ``` The exact list of services and ports depends on the installer version; what matters is that `10000` is included. ## Step 3 - Logging in and completing the post-install wizard Virtualmin authenticates with system accounts. On Ubuntu cloud images the `root` account often has no password, so set one if you have not done so: ```bash sudo passwd root ``` Open `https://host.your_domain:10000` and log in as `root`. If the Let's Encrypt request for the hostname succeeded during installation, the certificate is valid. Otherwise the browser warns about a self-signed certificate; accept it for now and check the DNS record of the hostname. The first time you log in, Virtualmin opens the **Post-Installation Wizard**. Walk through it: 1. **Memory use**: choose whether to preload Virtualmin libraries. Say no on servers with 2 GB of RAM or less. 2. **Virus scanning**: enable ClamAV only if you have the memory for it (it uses around 1 GB). 3. **Spam filtering**: enable SpamAssassin if the server will receive email. 4. **Database servers**: enable MariaDB. PostgreSQL is optional. 5. **MariaDB password**: set a strong root password for MariaDB. 6. **DNS zones**: enter a primary nameserver hostname if this server will host DNS; otherwise skip the check. 7. **Password storage**: keep the default of storing hashed passwords. 8. **SSL key directory**: keep the default per-domain directory. When the wizard finishes, click **Re-check and refresh configuration** on the dashboard. Virtualmin validates the stack and reports any problem it finds, such as a hostname that does not resolve. ## Step 4 - Creating your first virtual server A virtual server bundles everything a domain needs. In the left menu, make sure the **Virtualmin** tab is selected, then click **Create Virtual Server** and fill in: - **Domain name**: `your_domain` - **Administration password**: a strong password for this domain's owner, who can also log in to the panel with limited rights. - **Enabled features**: keep the defaults (DNS, Apache website, SSL website, mail, MariaDB database, Webmin login). Click **Create Server**. Virtualmin shows every action it performs: it creates the Linux user (named after the first part of the domain by default), its home directory under `/home`, the Apache virtual host, the DNS zone, the mail domain and a database. You can do the same from the command line with the `virtualmin` tool, which is handy for automation: ```bash sudo virtualmin create-domain --domain example2.your_domain --pass 'your_strong_password' --default-features ``` List the virtual servers to verify: ```bash sudo virtualmin list-domains ``` ```output Domain Username Description ------------------------------ -------------------- -------------------- your_domain your example2.your_domain example2 ``` Open `http://your_domain` in a browser. You should see the default Virtualmin placeholder page, served from `/home//public_html`. ## Step 5 - Requesting a Let's Encrypt certificate Each virtual server can have its own free certificate. In the panel, select the domain in the drop-down at the top of the left menu, then go to **Manage Virtual Server > Setup SSL Certificate > SSL Providers**. Choose **Let's Encrypt**, keep the domain names that are listed (with and without `www`) and click **Request Certificate**. From the command line: ```bash sudo virtualmin generate-letsencrypt-cert --domain your_domain ``` The request only succeeds if the DNS records of the listed names point to this server. Virtualmin renews the certificate automatically before it expires. Check the result: ```bash curl -sI https://your_domain | head -n 1 ``` ```output HTTP/2 200 ``` ## Step 6 - Managing the hosting account From the virtual server's menu you now have everything needed to run the site: - **Edit Databases**: create extra MariaDB databases and users for the domain. - **Edit Users**: add mailboxes and FTP users. Mail clients connect with the full address as the username. - **Web Configuration > PHP Options**: choose the PHP version and execution mode for the domain. - **File Manager** or SFTP with the domain's user: upload your application to `public_html`. To let the domain owner manage their own site, share the panel URL and the administration password you set in Step 4. They will only see their own virtual server. ## Step 7 - Keeping Virtualmin updated Virtualmin, Webmin and all the stack packages come from apt repositories, so normal system updates keep everything current: ```bash sudo apt update sudo apt upgrade ``` The dashboard also shows a **Package updates** counter. Run **System Settings > Re-Check Configuration** after major upgrades. ## Troubleshooting - **The installer stops with a hostname error**: `hostname -f` must return a name with at least one dot, and it must not be one of the domains you plan to host. Fix it as in Step 1 and run the installer again. - **Cannot reach port 10000**: check `sudo firewall-cmd --list-all` and any firewall configured in front of the server. Make sure you use `https://`, not `http://`. - **Let's Encrypt request fails**: the domain's A record does not point to this server yet, or port 80 is blocked. Check with `dig +short your_domain`. - **Login fails as root**: set the root password with `sudo passwd root`. The panel does not accept SSH keys. ## Conclusion You installed Virtualmin GPL on Ubuntu 24.04, completed the post-install wizard and created a virtual server with its own website, database, mail and a Let's Encrypt certificate. Next, configure backups under **Backup and Restore > Scheduled Backups** to a remote destination, set up SPF and DKIM for the mail domains, and review which features you actually need so you can disable unused services and free memory.